Skip to content

GitLab

Commit 54bd3e2d authored by Glenn K. Lockwood's avatar Glenn K. Lockwood
Browse files

allow compilation in the absence of mpicc 

- add new --without-mpi to bypass all mpicc checks
- add --disable-xxx-mod to individually enable/disable each module
- add report of enabled/disabled modules at end of configure
- does NOT report compiler version yet
- does NOT report whether MPI is enabled or not yet
parent e6dad0ee
Hide whitespace changes
Inline Side-by-side
Showing with 120 additions and 27 deletions
darshan-runtime/configure.in
View file @ 54bd3e2d
......@@ -8,44 +8,101 @@ dnl sanity checks, output header, location of scripts used here
AC_INIT([darshan-runtime], [3.1.7])
AC_CONFIG_SRCDIR([darshan.h])
AC_CONFIG_AUX_DIR(../maint/config)
AC_CONFIG_MACRO_DIR(../maint/config)
AC_CONFIG_HEADER(darshan-runtime-config.h)
AC_PROG_INSTALL
dnl Check for MPI
ENABLE_MPI=1
AC_ARG_WITH(mpi,
AS_HELP_STRING([--without-mpi], [Build without support for MPI]))
AS_IF([test "x$with_mpi" = "xno"],
ENABLE_MPI=,
[AC_DEFINE([HAVE_MPI], [], [Define if build is MPI-enabled])])
dnl Check to see if CC is an MPI compiler
dnl TODO: better error message here
AC_MSG_CHECKING(whether the mpicc compiler works)
AC_TRY_COMPILE([#include <mpi.h>], [int ret = MPI_Init(0, (void*)0)],
AS_IF([test "x$ENABLE_MPI" = "x1"],
[AC_MSG_CHECKING(whether the mpicc compiler works)
AC_TRY_COMPILE([#include <mpi.h>], [int ret = MPI_Init(0, (void*)0)],
AC_MSG_RESULT(yes),
AC_MSG_RESULT(no)
AC_MSG_ERROR(CC doesn't appear to be a valid MPI compiler. See INSTALL document or try adding CC=mpicc to your configure command line.)
)
AC_MSG_ERROR(CC doesn't appear to be a valid MPI compiler. See INSTALL document or try adding CC=mpicc to your configure command line.))],
AC_MSG_NOTICE(not checking whether the mpicc compiler works))
dnl runtime libraries require zlib
CHECK_ZLIB
AC_ARG_ENABLE(ld-preload,
[ --disable-ld-preload Disables support for LD_PRELOAD library],
AC_ARG_ENABLE(ld-preload,
[ --disable-ld-preload Disables support for LD_PRELOAD library],
[if test "x$enableval" = "xno" ; then
DISABLE_LDPRELOAD="1"
fi]
,)
AC_ARG_ENABLE(cuserid,
[ --disable-cuserid Disables attempted use of cuserid() at run time],
AC_ARG_ENABLE(cuserid,
[ --disable-cuserid Disables attempted use of cuserid() at run time],
[if test "x$enableval" = "xno" ; then
AC_DEFINE(__DARSHAN_DISABLE_CUSERID, 1, Define if cuserid() should be disabled)
fi]
,)
AC_ARG_ENABLE(group-readable-logs,
AC_ARG_ENABLE(group-readable-logs,
[ --enable-group-readable-logs
Set log files to be group readable],
Set log files to be group readable],
[if test "x$enableval" = "xyes" ; then
AC_DEFINE(__DARSHAN_GROUP_READABLE_LOGS, 1, Define if Darshan should set log files to be group readable)
fi]
,)
#
# Check for specific module enable/disable options
#
# POSIX module
BUILD_POSIX_MODULE=1
DARSHAN_POSIX_LD_OPTS="@${darshan_share_path}/ld-opts/darshan-posix-ld-opts"
AC_ARG_ENABLE(posix-mod,
AS_HELP_STRING([--disable-posix-mod], [Disables compilation and use of POSIX module]))
AS_IF([test "x$enable_posix_mod" = "xno"],
BUILD_POSIX_MODULE=
DARSHAN_POSIX_LD_OPTS=)
# MPI-IO module
BUILD_MPIIO_MODULE=1
DARSHAN_MPIIO_LD_OPTS="@${darshan_share_path}/ld-opts/darshan-mpiio-ld-opts"
AC_ARG_ENABLE(mpiio-mod,
AS_HELP_STRING([--disable-mpiio-mod], [Disables compilation and use of MPI-IO module (requires MPI)]))
AS_IF([test "x$enable_mpiio_mod" = "xno" || test "x$ENABLE_MPI" = "x"],
BUILD_MPIIO_MODULE=
DARSHAN_MPIIO_LD_OPTS=)
# STDIO module
BUILD_STDIO_MODULE=1
DARSHAN_STDIO_LD_OPTS="@${darshan_share_path}/ld-opts/darshan-stdio-ld-opts"
AC_ARG_ENABLE(stdio-mod,
AS_HELP_STRING([--disable-stdio-mod], [Disables compilation and use of STDIO module]))
AS_IF([test "x$enable_stdio_mod" = "xno"],
BUILD_STDIO_MODULE=
DARSHAN_STDIO_LD_OPTS=)
# PNETCDF module
BUILD_PNETCDF_MODULE=1
DARSHAN_PNETCDF_LD_OPTS="@${darshan_share_path}/ld-opts/darshan-pnetcdf-ld-opts"
AC_ARG_ENABLE(pnetcdf-mod,
AS_HELP_STRING([--disable-pnetcdf-mod], [Disables compilation and use of PnetCDF module (requires MPI)]))
AS_IF([test "x$enable_pnetcdf_mod" = "xno"],
BUILD_PNETCDF_MODULE=
DARSHAN_PNETCDF_LD_OPTS=)
# DXT module
BUILD_DXT_MODULE=1
AC_ARG_ENABLE(dxt-mod,
AS_HELP_STRING([--disable-dxt-mod], [Disables compilation and use of DXT module]))
AS_IF([test "x$enable_dxt_mod" = "xno"],
BUILD_DXT_MODULE=)
AC_ARG_ENABLE(
[bgq-mod],
[ --disable-bgq-mod Disables compilation and use of BG/Q module (for BG/Q systems)],
......@@ -237,11 +294,11 @@ CFLAGS="$old_cflags"
AC_CHECK_HEADERS(mntent.h sys/mount.h)
# We need to know the value of the $libdir and $bindir variables so that
# we can reference the correct path in the darshan compiler wrappers.
# Unfortunately, those two variables are not normally evaluated by autoconf.
# They are evaluated at build time using Makefile variable substitutions.
#
# We need to know the value of the $libdir and $bindir variables so that
# we can reference the correct path in the darshan compiler wrappers.
# Unfortunately, those two variables are not normally evaluated by autoconf.
# They are evaluated at build time using Makefile variable substitutions.
#
# The following logic was copied from mpich2 1.3.1 to resolve the $libdir
# variable at configure time.
#
......@@ -299,6 +356,11 @@ AS_IF([test "x$enable_mdhim" = "xyes"],
)
#
# Begin tests for MPI-enabled builds
#
AS_IF([test "x$ENABLE_MPI" = "x1"], [
# determine if the MPI library includes MPI-IO functions or not
AC_MSG_CHECKING(for MPI-IO support in MPI)
......@@ -308,11 +370,9 @@ AC_TRY_LINK([#include <mpi.h>], [
int amode;
MPI_Info info;
MPI_File fh;
MPI_File_open(comm, filename, amode, info, &fh);
],
MPI_File_open(comm, filename, amode, info, &fh);],
AC_MSG_RESULT(yes),
AC_MSG_ERROR(Darshan requires a version of MPI with MPI-IO support)
)
AC_MSG_ERROR(Darshan requires a version of MPI with MPI-IO support))
# At some point MPI-IO converted most API functions to be const correct. We
# need to test for this to determine how to define MPI-IO wrappers in
......@@ -321,7 +381,7 @@ AC_MSG_CHECKING(for MPI-IO prototypes without const qualifier)
AC_TRY_COMPILE(
[
#include <mpi.h>
int MPI_File_open(MPI_Comm comm, char *filename, int amode,
int MPI_File_open(MPI_Comm comm, char *filename, int amode,
MPI_Info info, MPI_File *fh)
{return 0;}
],
......@@ -335,7 +395,7 @@ AC_TRY_COMPILE(
AC_TRY_COMPILE(
[
#include <mpi.h>
int MPI_File_open(MPI_Comm comm, const char *filename, int amode,
int MPI_File_open(MPI_Comm comm, const char *filename, int amode,
MPI_Info info, MPI_File *fh)
{return 0;}
],
......@@ -365,27 +425,32 @@ AC_TRY_LINK([#include <mpi.h>], [
CFLAGS="$old_cflags"
LIBS="$old_libs"
# if this version of mpi defines an MPIO_Request type, then we assume that
# we should use it in the nonblocking MPI-IO functions. This is necessary
# for MPI 1.x implementations that did not use generalized requests yet in
# if this version of mpi defines an MPIO_Request type, then we assume that
# we should use it in the nonblocking MPI-IO functions. This is necessary
# for MPI 1.x implementations that did not use generalized requests yet in
# MPI-IO. Later MPI implementations might typedef MPIO_Request to MPI_Request
# so there is no harm in using the former if it is available there.
AC_CHECK_TYPE([MPIO_Request],
AC_CHECK_TYPE([MPIO_Request],
AC_DEFINE(__D_MPI_REQUEST, MPIO_Request, Generalized request type for MPI-IO)
,
,
AC_DEFINE(__D_MPI_REQUEST, MPI_Request, Generalized request type for MPI-IO)
,[#include <mpi.h>])
# attempt to detect library naming convention in mpi compiler script
AS_IF([$CC -show foo.c -o foo >& /dev/null],
AC_MSG_CHECKING(for old (pre-3.1.1) style MPICH library naming convention)
AS_IF([$CC -show foo.c -o foo |grep lmpich >& /dev/null],
AS_IF([$CC -show foo.c -o foo |grep lmpich >& /dev/null],
AC_MSG_RESULT(yes)
MPICH_LIB_OLD=1,
AC_MSG_RESULT(no)
MPICH_LIB_OLD=0),
MPICH_LIB_OLD=0)
])
#
# End of MPI-only checks
#
DARSHAN_VERSION="AC_PACKAGE_VERSION"
AC_SUBST(darshan_lib_path)
AC_SUBST(darshan_share_path)
......@@ -399,6 +464,15 @@ AC_SUBST(DARSHAN_USE_BGQ)
AC_SUBST(DARSHAN_USE_LUSTRE)
AC_SUBST(BUILD_HDF5_MODULE)
AC_SUBST(DARSHAN_HDF5_LD_OPTS)
AC_SUBST(BUILD_POSIX_MODULE)
AC_SUBST(DARSHAN_POSIX_LD_OPTS)
AC_SUBST(BUILD_MPIIO_MODULE)
AC_SUBST(DARSHAN_MPIIO_LD_OPTS)
AC_SUBST(BUILD_PNETCDF_MODULE)
AC_SUBST(DARSHAN_PNETCDF_LD_OPTS)
AC_SUBST(BUILD_STDIO_MODULE)
AC_SUBST(DARSHAN_STDIO_LD_OPTS)
AC_SUBST(BUILD_DXT_MODULE)
AC_SUBST(BUILD_MDHIM_MODULE)
AC_SUBST(DARSHAN_MDHIM_LD_OPTS)
AC_OUTPUT(Makefile
......@@ -418,3 +492,22 @@ share/mpi-profile/darshan-bg-cxx.conf
share/mpi-profile/darshan-bg-f.conf
share/ld-opts/darshan-base-ld-opts
)
AC_MSG_NOTICE(Building Darshan with the following features:)
AS_IF([test "x$BUILD_POSIX_MODULE" = "x"], [AC_MSG_NOTICE(POSIX module support: no)], [AC_MSG_NOTICE(POSIX module support: yes)])
AS_IF([test "x$BUILD_MPIIO_MODULE" = "x"], [AC_MSG_NOTICE(MPIIO module support: no)], [AC_MSG_NOTICE(MPIIO module support: yes)])
AS_IF([test "x$BUILD_STDIO_MODULE" = "x"], [AC_MSG_NOTICE(STDIO module support: no)], [AC_MSG_NOTICE(STDIO module support: yes)])
AS_IF([test "x$BUILD_PNETCDF_MODULE" = "x"], [AC_MSG_NOTICE(PnetCDF module support: no)], [AC_MSG_NOTICE(PnetCDF module support: yes)])
AS_IF(
[test "x$BUILD_HDF5_MODULE" = "x"],
[AC_MSG_NOTICE(HDF5 module support: no)],
[AS_IF(
[test "x$BUILD_HDF5_PRE110" = "x1"],
[AC_MSG_NOTICE(HDF5 module support: 1.10+)],
[AC_MSG_NOTICE(HDF5 module support: pre-1.10)]
)],
)
AS_IF([test "x$BUILD_DXT_MODULE" = "x"], [AC_MSG_NOTICE(DXT module support: no)], [AC_MSG_NOTICE(DXT module support: yes)])
AS_IF([test "x$DARSHAN_USE_MDHIM" = "x"], [AC_MSG_NOTICE(MDHIM module support: no)], [AC_MSG_NOTICE(MDHIM module support: yes)])
AS_IF([test "x$DARSHAN_USE_LUSTRE" = "x"], [AC_MSG_NOTICE(Lustre module support: no)], [AC_MSG_NOTICE(Lustre module support: yes)])
AS_IF([test "x$DARSHAN_USE_BGQ" = "x"], [AC_MSG_NOTICE(BG/Q module support: no)], [AC_MSG_NOTICE(BG/Q module support: yes)])
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment